1-9 A-D E-G H-M N-P Q-S T-Z

ACUMER 3100

acumer 3100; ACUMER 3100; ACUMER3100; acumer3100; 3100; akumer 3100; akumer3100; AKUMER 3100; AKUMER 3100; TH 3100; TH3100; th 3100; th3100; dispersant; DİSPERSANT; DISPERSANT; dıspersant; sıtabılızan; SITABILIZAN; STABİLİZAN; stabilizan; karboksılat; karboksilat; KARBOKSILAT; karboksılat; KARBOKSİLAT; SULFONAT; SÜLFONAT; sülfonat; sulfonat; NANYONIK; NANIONIC; NANİONİC; nanyonik; fonksiyonel; fonksıyonel; FONKSIYONEL; FONKSİYONEL; terpolımer; TERPOLIMER; TERPOLİMER; Terpolimer; DISPERSAN; DİSPERSAN; dıspersan; dispersan; sıtabılızant; SITABILIZANT; SİTİBİLİZANT; sitabilizant; stabilizant

cas no : 40623-75-4


ACUMER 3100 copolymer combines two functional groups: strong acid (sulfonate) and weak acid (carboxylate) that provide optimal anti-scale/dispersant efficiency through the following different mechanisms: Dispersing activity, which prevents precipitated crystals or other inorganic particules from agglomerating and depositing on surfaces. The sulfonate groups increase the negative charge of the carboxylate groups adsorbed onto particles and, by then, reinforce the repulsion between the particles, preventing them from aggregating into larger particles which can settle and deposit on tube surfaces and low flow areas. Solubility enhancement by threshold effect, which reduces precipitation of low solubility inorganic salts. Crystal modification, which deforms the growing inorganic salt crystal to give small, irregular, readily fractured crystals that do not adhere well to surfaces and can be easily removed during cleaning operations. Dispersant ve stabilizan; Carboxylate/Sulfonate/Nonionic functional terpolymer. ACUMER 3100 terpolymer contains three functional groups: strong acid (sulfonate), weak acid (carboxylate) and a nonionic that provide optimal dispersancy for most particules under a broad range of operating conditions. ACUMER 3100 is a good scale inhibitor and dispersant for cool water treatment. It has good inhibition for dry or hydrated ferric oxide. ACUMER 3100 is all organic dispersant and scale inhibitor. It can be also used as stabilizer of corrosion inhibitor for phosphate and phosphinic salt.

Usage Methods:

TH-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. when used alone, the dosage of 10-30mg/L is preferred. when used in other fields, the dosage should be determined by experiment.

Package and Storage:

Normally in 200L plastic drum, IBC (1000L) can also be used as required. Storage for ten months in shady and dry place.

Acar Chemicals © 2015 All Rights Reserved.