1-9 A-D E-G H-M N-P Q-S T-Z

ORP HYDROFLEX 64

Orp hydroflex 64

Synonyms:Orp hydroflex 64; ORP HYDROFLEX 64; ORP HYDROFLEX; Orp hydroflex; hydroflex; HYDROFLEX; Orp; ORP; Orp hidroflex 64; ORP HİDROFLEX 64; orp hydroflex; orp hidroflex 64; orp hydroflex 64; orphydroflex64; orphidroflex64; orphydroflex; orphidroflex; orp hidrofilex 64; orphidrofilex64; orp hydroflex64; orphydroflex 64; ORPHYDROFLEX64; ORPHYDROFLEX 64; ORPHYDROFLEX64; orp hydroflex 6; orp hydroflex 61; orp hydroflex 67; orp hydroflex 66; ORP HYDROFLEX 6; ORPHYDROFLEX6; Orp hiydroflex 64; Orp hydrofilexi 64; Orp hydroflexi 64; Orp hydroflexx; hydroflex 64; hydroflex; ORP HYDROFİLEX; ORP HİDROFİLEX64; ORP HYDROFILEX 64; ORP HYDROFLEX64; Orp hydrofleks 64; Orphydrofleks 64; Orphidrofleks 64; Orp hidrofleks 64; Orphidrofileks 64; Orp hidrofileks 64; Orphidrofileks64; Orphydrofleks64; Orphyrofleks 64; Orphidrofleks 64

 


ORP Hydroflex 64 is a redispersible powder produced by drying an emulsion of Vinyl Acetate / Vinyl Versatate / Acrylic terpolymer with PVOH as protective colloid. The specific chemical composition of the polymer allows coalescence of the redispersed polymer at low temperatures and provides good adhesion on mineral substrates.

 

ORP Hydroflex 64 is used to modify mixtures containing hydraulic binders. Due to its particular chemical / physical composition, ORP Hydroflex 64 improves adhesion, flexibility, hydrophobicity and water resistance of mortars containing hydraulic binders such as cement, gypsum or lime. Especially because of the flexible nature, ORP Hydroflex 64 performs very well in transverse deformation conditions.

 

TYPICAL PROPERTIES

Appearance Chemical composition Stabilizing System
Residual Humidity (%) Bulk Density (g/l)
Ash Content (%) Alkali Resistance
After 1:1 Dispersion with Water MFFT (°C)

White powder
VA / VV / Acrylic Terpolymer PVOH
Max. 2.0
350 - 550
12 ± 2
High 0 ±1

APPLICATION AREAS

 

ORP Hydroflex 64 can be used in mortar formulations where highly flexbily/elastic, hydrophobic and water resistant behavior is required at the same time.

In high performance of ceramic tile grouts formulations (CG2) ORP Hydroflex 64 can be used with the ratio of 2.0 - 4.0 % in weight and without requiring an additional hydrophobic agent. Moreover ORP Hydroflex 64 is a very suitable redispersible powder polymer for cementitious water proofing mortars.It can be used with the ratio of 7.0 - 12.0 % in weight in 1K cementitious water proofing mortar formulations. Because of its molecular structure it provides high crack bridging ability. Also ORP Hydroflex 64 performs very well in cementitious exterior plasters and topcoats with the amunt of 2.0 - 4.0 %.

 

PRODUCT HANDLING - STORAGE - SHELFLIFE
Packaging: Pallet with 18 paper bags, each 25 kg, also 500 or 1000 kg of big bags.
Packages must be stored in a dry and cool warehouse. Pallets must not be stacked on top of each other to avoid caking due to the thermoplasticity of the polymer.
Packing must be closed well after usage for protection against humidity and caking. It has to be used within 6 months after the date of delivery.

 

1.1. Product identifier

 

Product name ORP HYDROFLEX 64
Chemical name and synonym Vinyl Acetate l VeoVa l Acrylic terpolymer

 

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use Redispersible Powder for Dry-Mix Mortars

. Mixtures

The product does not contain substances classified as being hazardous to human health or the environment pursuant to the provisions Regulation (EU) 1272/2008 (CLP) (and subsequent amendments and supplements) in such quantities as to require the statement.

. Information on basic physical and chemical properties

 

Appearance powder
Colour white
Odour characteristic
Odour threshold Not available
pH 5,0-8,0 (1:1 aqueous soln.)
Melting point / freezing point Not available
Initial boiling point Not applicable
Boiling range Not available
Flash point Not applicable
Evaporation Rate Not available
Flammability of solids and gases Not available
Lower inflammability limit 20 g/m3
Upper inflammability limit Not available
Lower explosive limit Not available
Upper explosive limit Not available
Vapour pressure Not available
Vapour density Not available
Relative density Not available
Solubility Not available
Partition coefficient: n-octanol/water Not available Auto-ignition temperature > 300 °C
Decomposition temperature Not available
Viscosity Not available
Explosive properties Not available
Oxidising properties Not available

 

Acar Kimya A.Ş. © 2015 Tüm Hakları Saklıdır.