1-9 A-D E-G H-M N-P Q-S T-Z

LUPASOL TYPES

Lupasol; LUPASOL; LUPASOL FG; LUPASOL G 20 WATER FREE; LUPASOL PR 8515; LUPASOL WF; LUPASOL G 20; LUPASOL G 35; LUPASOL G 100; LUPASOL HF; LUPASOL P; LUPASOL PS; LUPASOL PO 100; LUPASOL PN 50; LUPASOL PN 60; LUPASOL SK

Lupasol Types
-Lupasol FG
-Lupasol G 20 waterfree
-Lupasol PR 8515
-Lupasol WF
-Lupasol G 20
-Lupasol G 35
-Lupasol G 100
-Lupasol HF
-Lupasol P
-Lupasol PS
-Lupasol PO 100
-Lupasol PN 50
-Lupasol PN 60
-Lupasol SK

Fields of application

Printing inks adhesion promoters in car tires adhesives complexing plastics modification coatings and paints pigment manufacture protein immobilization textile auxiliaries packaging water treatment

Description

High molecular weight ethylenimine homopolymer. Colorless to pale yellow, aqueous solution with honey-like consistency.

Applications

Lupasol P has been used in the paper industry for over 50 years for increasing paper strength and flocculating fines in waste streams for recycling. Today this is its largest use.
Lupasol P promotes adhesion between different types of polyolefin surfaces, poly-olefins/paper, and metal films/paper.
Lupasol P also improves adhesion of tire cords to natural and synthetic rubbers.
Lupasol P promotes adhesion of paints, ink jet inks, pigments, dyes, and fillers to various surfaces. It is a cationic dispersant.
Lupasol P, also promotes adhesion to metal surfaces and improves corrosion inhibitors.
Lupasol chelates heavy metal ions selectively and reversibly.
It will scavenge organic halides.
Lupasol P anchors active enzymes to porous and non-porous supports for use in industrial chemical synthesis.
Immobilized PEI effectively filters endotoxins and pathogens from blood plasma.

Note

Lupasol P and Lupasol PS are the same molecule with different percent solids.

Shelf Life

About 1 year in sealed containers. Freezing can occur at temperatures below 0°C, but it is fit for use after thawing and stirring.


Specifications

Solids content.............................. 48.0 - 52.0 %
Viscosity @ 20°C........................ 18,000 - 40,000 mPa·s

Typical physical properties

Density (20°C)................................................... 1.09 g/cm3
Pour Point...............................................................-3°C
pH.................................................................................... 10-12
Dry Content............................................................50%
Viscosity (20°C).............................................18,000 - 40,000 cps
Average Molecular Weight.....................750,000

Acar Kimya A.Ş. © 2015 Tüm Hakları Saklıdır.